Recycling your old jeans into new and useful things is fun and frugal. The denim recycled from old jeans is very durable and the fabric is very versatile. Oh and the best part, when you recycle denim from materials you have on hand, its FREE.
Today I want to share how to make an oven mitt from your old jeans. There are several good tutorials on the Internet showing how to create a homemade oven mitt. (Edit:) Here is a oven mitt template you can use. The original one I used is no longer free so the link has been changed to one that is free.
Cut two denim panels using the mitt template. Then cut two from fabric for your lining and two for your mylar batting. If you don’t want to use store bought mylar batting, just cut two pieces from old towels but make sure they are thick so you get enough protection for inside of your mitt.
Click on any photos to supersize
Because denim is so hard to machine sew through several layers, I assembled my oven mitt in two pieces. First pin the two denim panels together with right sides together. Machine sew the two denim panels together using a narrow hem around the mitt. Leave the end hem unfinished at this point. Trim curves and clip at thumb turn. Turn wrong sides to the inside. Using a pencil’s eraser end, push out the thumb and edges. Press with hot iron and turn under a narrow hem along the unfinished edge of the denim mitt shell.
Next put the two fabric lining panels together with right sides together. Then add a batting layer to the bottom and top of your lining insert. Pin in place and machine stitch a narrow hem around the mitt. Leave the end hem unfinished for now. Trim edges and clip at thumb curve but don’t turn. Turn under a narrow hem and press with a hot iron along the unfinished edge of the fabric lining.
Lastly insert your fabric lining inside your denim oven mitt. Check fit and trim edges if necessary so the insert fits nicely inside your denim mitt shell. Match hem edges and pin the two edges together. Machine stitch very close to the edge to enclose the hem of the denim panel and the lining insert. Fold over the edge if desired to show off your fabric lining or add embellishments to the outside of the mitt.
Need a potholder to go along with your oven mitt? You can add a denim potholder that sports a pocket from a pair of jeans to create a cool recycled denim kitchen set.
I’ve been on a bit of a kick recycling denim jeans lately. I’ve made several tote bags from old jeans which are posted here under the Denim Crafts category. I’ve been wanting to make a potholder and still want to make a oven mitt too. But first things first, right? Here is my recycled denim potholder complete with a jeans pocket!
Here is my denim potholder in use.
Old recycled denim makes great potholders. All you need is an old pair of jeans, some cotton for padding and I added a piece of insul-bright. Insul-bright is an inexpensive reflective material that is designed for providing padding for potholders, oven mitts etc. Use only 100% cotton towels and cotton crafting batting. Do not use polyester batting or towels as the heat passes right through that material. I paid less than a dollar for a small piece of insul-bright so I figure this is a bargain to provide a good insulation for my potholder. Plus I have leftovers for my future oven mitt project.
Below you will find my step-by-step picture tutorial on how to make this recycled denim potholder.
This recycled bag project is a request from Moonshadow. She suggested I craft a waterproof sit-upon (SitUpon) like what the Girl Scouts use to sit on. I crocheted this from recycled plastic bags or plarn first. Then I added 4 layers of plastic that I fused onto the back side of the sit-upon to completely waterproof it. I added a handle to the sit-upon so you can carry it around easily too. And as an option I added a layer of recycled denim to soften up the sit-upon and give it a unique look.
Here is my plastic only sit-upon without the denim. This is my basic recycled plastic sit-upon that is crocheted using plastic bags made into plarn and with a fused plastic backing. This fused plastic backing makes the sit-upon waterproof.
Click to supersize photos
Here is the back side of the finished sit-upon and also another version of how you can decorate your finished denim side by adding a denim jean pocket.
I tried to keep this project simple so a young Girl Scout or anyone could make this sit-upon without a bunch of sewing required. You can just glue the hearts on or even hand decorate the denim. Handwriting your name on the denim may be another embellishment a Scout could add. Needless to say, you can decorate as much or as little as you like. I’ve included several different ideas and here is the free crochet pattern and tutorial on making a recycled sit-upon.
Free Sit-Upon Crochet Pattern
Materials needed:
One large ball of plastic bag yarn aka Plarn – approx. 35-40 plastic grocery bags
Four plastic bags cut into large pieces to cover back for fusing
Waxed paper for the fusing
Option for denim cover: One large piece of recycled denim from an old pair of jeans
appox. 15 inches x 15 inches
Hook: N (9 mm) metal crochet hook
Description: Plastic Sit-Upon with fused plastic backing
Sit-Upon measures 13 inches wide and 13 inches long with 5 inch handle
Option with recycled denim cover measures 14-1/2 inches x 14-1/2 inches
Directions:
Ch 32 […]
Recent Comments